Wednesday, June 19, 2013

(Back) Living Room Updates: Marble Fireplace

I finally got all of the marble fireplace pictures downloaded so here we go!  I left off and Wes had just put the first tile up!  In one of our many decision making conversations- I decided that we should go from the top to the bottom which actually made this a much slower than anticipated project because Wes had to let each row dry one at a time.  Here you can see that we held each row up with the long level and a wooden pole and we would let it dry overnight.



Every night after I got home from work, Wes would add another row- working his way down the fireplace.  It was a pretty simple process to put it up- Wes would put a layer of thin set onto the plywood and then he would put up the tile one by one using spaces.  Once the row was complete, he would put up the level and the wooden dowel to hold it into place.    


And I would wrangle this toddler tornado and keep her away from the thin set!


One day when Emma went to Wes's parents house- he was able to get a lot accomplished!  All of our tiles needed to be cut in half for the end tile on every other row, so he was able to make all of the cuts.  We borrowed a tile saw from my brother-in-law, which helped save us a bunch of money.  


And he was able to lay down the bottom of the fireplace.


Here is a look at the whole bottom of the fireplace.  This is when I started to get really excited!


Wes continued to make his way down the rest of the fireplace, until it was complete!


Then, due to a lot of stuff going on it- the fireplace sat like this for 2 - 3 weeks.  Emma went over to Wes's parents house again one week, and Wes grouted all day.  He first taped everything off so he wouldn't ruin any of the paint on the fireplace or on the mantle.


We went with the same grout recommended by Young House Love- it is a greyish white rather than a pure white.  I LOVE the choice!


Once the grout was mixed, Wes put it on (I think with a grouting brush is what it is called?).  If you look in the top right corner, you can see it going on.  


I forgot to ask Wes, but I am pretty sure he would put the grout on, then wipe it away with a sponge.  Here is what it looks like when it was almost complete.


And a close up.


Once Wes had cleaned it all up, it started to look really good!  When I came home from work, I told him it looked so good- I didn't even think it needed quarter round trim anymore!  


We waited a few days for the grout to dry, then Wes sealed the grout.  He also repainted the fireplace black and then he painted the trim around the fireplace and the mantle white.  The last step was to lay the trim back down.  We went to Home Depot and bought the trim (this was one of the most expensive parts of the project that took both of us by surprise!).  He cut the trim, and then secured it to the floor- I am pretty sure that he used liquid nails in order to secure it.  


We let that dry, pulled up the tape and the fireplace was finally COMPLETE.  


It was well work the wait!  I think my husband did a wonderful job sticking with it and getting it done!  It turned out fabulous!

1 comment: